How Much Does a Home Renovation Cost?
A home renovation can cost a few thousand dollars for a simple cosmetic refresh or well into six figures for a complete remodel involving kitchens, bathrooms, structural changes, new systems, and premium finishes. As a current U.S. benchmark, 2026 cost data from Angi places the average whole-house remodel at about $52,000, although projects can range from roughly $3,000 to $225,000 depending on their scope. HomeAdvisor reports a similar average of about $52,151, with many renovations falling between approximately $19,470 and $88,356. These numbers are useful starting points rather than quotes, because renovation pricing can vary dramatically between homes and locations.
The final cost of renovating a house depends on much more than square footage. Kitchens and bathrooms usually cost more per square foot than bedrooms because they contain cabinetry, plumbing, electrical work, appliances, waterproofing, and specialized fixtures. Structural changes, custom materials, old-house repairs, contractor labor, permits, architecture, waste disposal, and temporary accommodation can increase the budget further. HomeAdvisor’s 2026 data puts many whole-house renovations at roughly $15 to $60 per square foot, while premium work can rise to $150 per square foot or more. This guide explains home renovation costs, room-by-room estimates, hidden expenses, budgeting strategies, and the factors that can make one renovation significantly more expensive than another.
How Much Does a Home Renovation Cost in 2026?
For homeowners looking for a quick planning figure, approximately $20,000 to $90,000 covers a broad portion of professionally completed U.S. home renovations, although this range should never be treated as universal. HomeAdvisor currently reports a normal range of $19,470 to $88,356 and an average around $52,151. A relatively small renovation involving paint, flooring, lighting, and minor repairs may remain below this range, while a complete gut renovation can exceed it substantially. The amount you actually need depends on how many rooms are changing, whether layouts remain intact, and how much hidden repair work becomes necessary after demolition.
A light renovation sits at the lower end of the cost spectrum because it keeps most of the home’s existing structure and systems. Work might include interior painting, replacing some flooring, updating lighting, refinishing cabinets, changing hardware, repairing trim, and refreshing fixtures. If the house is fundamentally sound, these changes can make it feel significantly newer without paying for structural demolition or major plumbing relocation. Angi notes that whole-house projects can begin around $3,000 when only limited work is required, although that figure would represent a very small scope rather than a comprehensive renovation. Cosmetic renovation is generally the most predictable category because fewer hidden building systems are disturbed.
A mid-range renovation usually involves several rooms and more substantial replacement. A homeowner might renovate the kitchen, update one or two bathrooms, install new flooring throughout major living spaces, repaint the interior, improve lighting, and complete necessary repairs. Existing walls and major plumbing locations may remain largely unchanged, which helps contain labor and engineering costs. This type of project often falls close to the broad national averages, but property size and regional labor pricing can move it considerably higher or lower. Standard or semi-custom materials generally keep spending more manageable than fully bespoke cabinetry, imported stone, premium appliances, and architecturally complex changes.
A major whole-house remodel can easily exceed $100,000 because almost every part of the property may be affected. Kitchens and bathrooms may be stripped completely, electrical and plumbing systems upgraded, windows replaced, walls altered, flooring installed throughout, and structural or energy-efficiency work completed simultaneously. Angi’s current remodeling estimate extends as high as roughly $225,000 depending on rooms, materials, and project scope. Larger luxury renovations can go higher still, particularly in expensive metropolitan markets or properties requiring custom architectural work. Once a project changes the building rather than merely refreshing it, labor, design, permitting, and technical costs become a much larger part of the budget.
Homeowners outside the United States should not convert these dollar figures directly and assume they represent local prices. Labor rates, taxes, construction standards, permit requirements, imported-material costs, housing types, and contractor markets differ significantly between countries and even between nearby cities. The most reliable estimate comes from creating a detailed scope and obtaining several current local quotations for comparable work. National renovation averages are best used to understand relative scale rather than predict an exact invoice. They can tell you that moving plumbing usually costs more than repainting cabinets, for example, but only local professionals can price the labor and materials available in your specific market.
Home Renovation Cost Per Square Foot
Cost per square foot provides a convenient way to estimate a whole-house renovation before every room has been designed. Current HomeAdvisor data suggests roughly $15 to $60 per square foot for many renovations, with premium finishes and extensive customization potentially pushing the number toward $150 per square foot or more. A 2,000-square-foot house could therefore produce a rough planning range from $30,000 to $120,000 at the standard benchmark, while a luxury project could become considerably more expensive. The method is helpful for early budgeting but should not replace detailed room-by-room estimates once the project scope becomes clearer.
Using the same $15 to $60 guideline, HomeAdvisor estimates a 1,250-square-foot renovation at roughly $18,750 to $75,000 and a 1,600-square-foot project at about $24,000 to $96,000. A 2,000-square-foot house falls around $30,000 to $120,000, while a 2,500-square-foot house may range from approximately $37,500 to $150,000. These examples show why house size matters even when two owners select similar finish levels. Larger homes simply require more paint, flooring, trim, doors, electrical fixtures, heating or cooling capacity, and labor hours to complete comparable work.
Square-foot pricing becomes less reliable when only part of a house is being renovated. A 100-square-foot kitchen can cost far more per square foot than a 300-square-foot bedroom because the kitchen contains cabinetry, countertops, appliances, plumbing, electrical circuits, lighting, and ventilation. The same issue applies to bathrooms, where waterproofing, fixtures, plumbing, and tile concentrate substantial cost into a relatively small area. This means you should not multiply one general whole-house rate by the size of a bathroom and expect an accurate estimate. Room type matters almost as much as square footage because different spaces require dramatically different levels of labor and materials.
The existing condition of the property also changes square-foot costs. Renovating a relatively modern home with level floors, sound plumbing, and compliant electrical systems can be far cheaper than renovating an older house of the same size. Removing flooring may reveal a damaged subfloor, while opening walls can uncover deteriorated pipes, previous unapproved alterations, or wiring that needs significant work. These problems increase costs without adding visible square footage. Older homes should therefore carry a larger contingency allowance, particularly when extensive demolition will expose building systems that have not been inspected for decades.
Use cost per square foot as a screening tool rather than a construction contract. If your budget is $40,000 and a preliminary calculation suggests the proposed renovation could cost $100,000, you know the scope must change before spending heavily on drawings or materials. Once the overall project appears financially realistic, replace broad averages with individual estimates for the kitchen, bathrooms, flooring, painting, systems, exterior work, labor, permits, and contingency. This creates a far more useful renovation budget because it shows exactly which components are driving the total. Broad square-foot estimates tell you whether a project is plausible, while detailed quotations tell you what it is likely to cost.
Home Renovation Cost by Project Scope
A cosmetic renovation generally costs the least because it changes finishes rather than the structure of the house. Common work includes paint, wallpaper removal, lighting fixtures, hardware, basic flooring, cabinet refinishing, and minor repairs. Depending on property size and how much work homeowners complete themselves, this kind of refresh can cost only a few thousand dollars or grow into the tens of thousands when multiple rooms are involved. Cosmetic renovations are also easier to phase because bedrooms or living areas can often be completed independently. Keeping functional kitchens, bathrooms, windows, and building systems in place prevents many of the largest expenses associated with remodeling.
A moderate renovation involves replacing more components while preserving the general floor plan. Examples include new kitchen cabinets without relocating the sink, a bathroom remodel using existing plumbing positions, new flooring throughout the home, extensive interior painting, updated lighting, and selected window or door replacements. This level often offers a good balance between visual transformation and budget control because the property feels substantially newer without major structural intervention. Standard materials and stock or semi-custom products can keep costs closer to national averages. Reusing serviceable elements, such as appliance locations or cabinet boxes, can further reduce the amount of demolition and labor required.
A major renovation changes layouts or building systems as well as finishes. Removing walls, moving kitchens, adding bathrooms, replacing electrical panels, rerouting plumbing, installing new HVAC systems, altering windows, and completing structural reinforcement all add technical complexity. Professionals such as architects, structural engineers, electricians, plumbers, and specialist contractors may become necessary before general finishing work even begins. Major renovations also require more coordination because one change can affect several trades. Moving a sink, for example, may influence plumbing, cabinetry, flooring, electrical outlets, wall finishes, and countertop fabrication rather than generating only one plumbing invoice.
A gut renovation goes further by removing much of the interior back to structural framing or major building components. This can make sense for severely outdated properties, homes with widespread system failures, or projects where the owner wants a fundamentally different layout. Costs increase because demolition and disposal are substantial and nearly everything removed must eventually be replaced. The advantage is that electrical, plumbing, insulation, and other concealed systems become accessible, allowing the house to be comprehensively updated. The disadvantage is that hidden problems are almost guaranteed to become part of the project, making contingency planning and professional design significantly more important.
An addition or expansion generally requires a different budget from a renovation contained within the existing building. New floor area can involve foundation work, framing, roofing, exterior cladding, insulation, windows, electrical systems, heating and cooling, interior finishes, permits, design, and structural integration with the existing home. Bathrooms and kitchens added within extensions raise costs further because of plumbing and cabinetry. Expanding the footprint can be worthwhile when additional space solves a major problem, but it should not be compared directly with repainting or remodeling existing rooms. Creating new square footage usually carries more construction scope than improving square footage the house already contains.
Kitchen and Bathroom Renovation Costs
Kitchens are usually among the most expensive rooms to renovate. Angi’s March 2026 data places a professional kitchen remodel at an average of approximately $26,940, with many projects between roughly $14,589 and $41,548. It categorizes minor kitchen remodels around $10,000 to $20,000, major projects around $20,000 to $65,000, and complete renovations around $65,000 to $130,000 or more. The huge difference comes from cabinetry, appliances, countertops, flooring, electrical work, plumbing, demolition, and whether the existing room layout remains intact.
Kitchen layout changes are particularly expensive because they create costs across several categories simultaneously. Moving the sink affects supply pipes and drainage, while relocating a range can require new electrical or gas connections and ventilation. Removing walls may require structural work and repairs to ceilings or flooring. Custom cabinets cost more than stock products, and luxury stone countertops or built-in appliances can push the project toward the high end quickly. Angi currently estimates kitchen remodeling at roughly $75 to $250 per square foot, demonstrating why even a relatively small kitchen can carry a substantial total cost.
Bathrooms are smaller but can also be expensive per square foot because nearly every surface has technical requirements. Angi’s July 2026 cost guide reports that many professional bathroom remodels fall between approximately $6,648 and $17,646, with an average around $12,146. Its broader scope estimates put minor projects around $3,000 to $10,000, partial renovations around $10,000 to $25,000, and full remodels around $25,000 to $80,000. Luxury bathrooms can exceed these figures when plumbing is relocated, rooms are expanded, or premium custom fixtures and tile are added.
Waterproofing and plumbing are the areas where bathroom budgeting should remain conservative. Removing an old shower can reveal damaged framing or subfloors that need repair before new finishes can be installed. Changing the location of a toilet, shower, or vanity adds plumbing labor and can affect walls or floors. Tile installation involves surface preparation, waterproof membranes, adhesive, grout, trim, and skilled labor in addition to the advertised tile price. Angi’s current shower-remodel data alone places many projects around $2,000 to $9,000, with the broader possible range reaching approximately $300 to $15,000 depending on scope.
One of the easiest ways to control kitchen and bathroom renovation costs is to preserve plumbing locations and reuse serviceable components. Refinishing cabinets instead of replacing them, updating a vanity without moving the drain, keeping appliances in the same positions, and limiting tile to areas where it is useful can reduce labor significantly. These rooms also reward early planning because fixtures, appliances, cabinets, and finishes need to work together dimensionally. Making major changes after cabinets or plumbing have already been installed can generate expensive rework. The cheapest successful kitchen or bathroom is usually not the one built with the lowest-quality materials, but the one designed efficiently before contractors begin.
Flooring, Exterior and Other Renovation Costs
Flooring costs vary substantially according to material, subfloor condition, room size, and installation complexity. Angi’s July 2026 data places professional flooring installation for many projects between approximately $1,528 and $4,859, while another current estimate puts flooring at roughly $3 to $22 per square foot. Synthetic products such as some laminate or vinyl options can sit closer to the lower end, while hardwood, stone, and specialist tile typically cost more. Removing old flooring, installing underlayment, repairing subfloors, leveling surfaces, and replacing trim can raise the final price beyond the material cost shown in a showroom.
Subfloor problems are a particularly important hidden flooring expense. Angi estimates subfloor replacement at roughly $1,500 to $5,000 in relevant projects, while underlayment for a 500-square-foot area can add hundreds or even a few thousand dollars depending on materials and requirements. These costs are difficult to predict until existing carpet, tile, laminate, or hardwood has been removed. Moisture damage, squeaking, uneven sections, or previous poor installation can all require preparation before new flooring begins. Installing expensive material over a bad base usually creates problems later, so subfloor repairs should not be skipped simply to preserve the original budget.
Exterior renovation can also represent a significant expense because it involves weather-resistant materials and often requires ladders, scaffolding, specialist installation, or extensive preparation. Angi’s 2026 exterior remodeling guide places many exterior projects between roughly $5,000 and $30,000, depending on materials and scope. Projects can include siding, doors, windows, exterior paint, trim, gutters, roofing-related elements, and repairs to damaged surfaces. A whole exterior transformation naturally costs more than replacing one door. The home’s height, access, existing material condition, and local climate can also influence labor requirements substantially.
Painting is often one of the more economical ways to refresh a home, but full professional painting still requires a meaningful budget when large areas and significant preparation are involved. Costs depend on wall condition, ceiling height, trim, doors, surface repairs, primer requirements, number of coats, and local labor rates. Homeowners sometimes underestimate preparation because they calculate only the number of paint cans required. Filling cracks, sanding, protecting floors, removing loose material, repairing drywall, and preparing old trim can take longer than applying the final finish. DIY painting can reduce labor expense when homeowners have the time and skill, but difficult ceilings and exterior work may still justify professionals.
Electrical, plumbing, heating, cooling, windows, roofing, and structural work can each become major independent budget categories. These items are difficult to summarize with one reliable number because the required work varies tremendously between properties. Replacing a few outlets is fundamentally different from rewiring an older house, just as repairing one pipe differs from replacing extensive plumbing. The best approach is to inspect major systems before finalizing the cosmetic renovation budget. If the property needs substantial infrastructure work, reserve money for those projects first. A beautiful $40,000 kitchen becomes far less valuable if an aging roof or electrical system immediately requires another major investment.
Labor, Permits and Hidden Renovation Costs
Labor frequently represents one of the largest parts of a renovation budget because construction involves more than purchasing products. Contractors charge for demolition, preparation, installation, coordination, cleanup, and the expertise required to perform work correctly. Kitchens and bathrooms are particularly labor-intensive because several trades may work in a small space. Current Angi data for small bathroom remodeling estimates that labor can account for roughly 40% to 60% of the project budget. The exact share differs between projects, but homeowners should never assume that buying $10,000 in materials means the renovation will cost only a little more than $10,000.
Permits create another budget item that varies heavily by jurisdiction and project type. HomeAdvisor’s current whole-house renovation guide suggests budgeting approximately $500 to $2,500 for permits in many projects, while Angi’s bathroom guide lists approximately $100 to $1,000 for bathroom-remodel permits. These figures are only examples because local authorities determine actual fees and requirements. Structural changes, electrical work, plumbing, additions, or zoning-related projects may require additional approvals and professional documentation. Always check local rules before construction rather than treating national permit averages as guaranteed pricing.
Design services can also become part of the renovation cost, especially when layout or structural changes are involved. Architects, interior designers, kitchen designers, structural engineers, and other specialists can help prevent mistakes that would be expensive to correct after construction. Their fees may be charged as a flat amount, hourly rate, percentage, or combination depending on the professional and project. Homeowners sometimes see design fees as optional overhead, but a carefully developed layout can reduce waste and change orders. The more complicated the project, the more valuable coordinated drawings and specifications can become because several contractors need to understand exactly what should be built.
Demolition and disposal should have their own allowance rather than disappearing inside a general contractor estimate. Old cabinets, drywall, tile, flooring, fixtures, packaging, and construction debris all have to be removed and disposed of appropriately. Bathrooms alone can involve demolition charges of roughly $1,000 to $2,300 according to Angi’s current cost guide. Large renovations may require dumpsters, hauling, temporary protection, and repeated cleanup. Hazardous-material remediation can increase costs substantially in older buildings when asbestos, lead-based paint, mold, or other issues require specialized handling rather than ordinary demolition.
Temporary living expenses are another hidden cost homeowners frequently overlook. A kitchen renovation can increase food spending because cooking facilities are unavailable, while major whole-house construction may require moving out completely for part of the project. Storage, pet boarding, additional transportation, laundry, temporary kitchens, and missed work can all create indirect expenses. HomeAdvisor specifically recommends considering alternate living arrangements when creating a renovation budget. These costs do not improve the house itself, but they still affect how much money the household needs to complete the renovation without financial strain.
What Factors Increase Home Renovation Costs?
Location is one of the strongest cost factors because contractor wages, material delivery, permit fees, taxes, and housing demand differ across regions. Angi’s current kitchen-remodel estimates, for example, show substantial regional variation across the United States, with some areas carrying far higher ranges than others. Large metropolitan markets frequently cost more because skilled labor and general operating expenses are higher. Rural projects can sometimes have lower labor rates but higher travel or delivery expenses when specialist contractors and materials are not available nearby. Online national averages should therefore always be adjusted mentally for the local construction market.
Material quality creates another major difference. Stock cabinets, laminate counters, basic tile, and standard fixtures can keep a renovation relatively affordable, while custom joinery, natural stone, handmade tile, premium flooring, and luxury appliances can multiply costs quickly. Higher price does not automatically mean better value, because some premium products require more maintenance or specialized installation. Compare durability, warranty, repairability, and how long you expect to remain in the home. Spending more can be worthwhile for high-use features, but applying premium specifications to every surface can push a project far beyond the price range originally envisioned.
Changing the floor plan increases costs because existing infrastructure must be modified. Removing walls can involve structural engineering, beams, electrical relocation, patching, flooring repairs, and permits. Moving a bathroom creates new drainage and water-supply requirements, while relocating a kitchen can affect gas, ventilation, appliances, cabinetry, and electrical circuits. Keeping the existing layout is one of the most effective ways to reduce renovation costs without necessarily compromising appearance. A dated room can often be transformed visually through surfaces and storage improvements while leaving the expensive hidden infrastructure where it already works.
Age and condition of the home create uncertainty that broad estimates cannot capture well. Older houses may contain previous renovations, nonstandard framing, aging services, damaged plaster, lead paint, asbestos-containing materials, inadequate insulation, or moisture problems. Even when none of these issues is severe, bringing older systems into compliance with current requirements can increase the scope. Newer homes may also contain hidden defects, but less invasive work generally creates fewer unknowns. A pre-renovation inspection and professional evaluation of major systems can reduce surprises, though no inspection can see everything hidden behind walls and floors.
Finally, changing decisions after construction begins can increase the cost even when every contractor is performing efficiently. Reordering cabinets, changing tile, relocating outlets, or selecting different fixtures after installation work has started can generate additional materials, labor, and delays. These changes are typically handled through change orders and should be priced before approval. Some changes are unavoidable when hidden conditions appear, but preference-driven changes can often be prevented through better planning. The earlier a decision affects structural work, plumbing, electrical, or custom fabrication, the more expensive it usually becomes to reverse after contractors have already completed related work.
How to Build a Realistic Home Renovation Budget
Begin by defining exactly which spaces are included and what level of work each one requires. Instead of writing “renovate house,” separate the project into kitchen, bathrooms, flooring, painting, electrical, exterior, structural repairs, and other categories. Decide whether each area needs cosmetic improvement, partial replacement, or full remodeling. Once the scope is clear, use national figures only as rough planning numbers and request several local contractor estimates for the major packages. NAR’s current consumer guidance recommends interviewing at least three remodeling contractors, gathering bids, and researching the businesses before hiring. Comparable quotations provide far more useful information than one informal estimate.
Create a detailed budget containing both visible and hidden costs. Include materials, labor, demolition, permits, design, engineering, delivery, waste removal, temporary storage, and accommodation where relevant. Add separate allowances for appliances, hardware, lighting, and finishing details because these items can disappear inside a broad room estimate. Track the amount budgeted, quoted, committed, and paid for every category. This prevents the common mistake of believing money remains available simply because invoices have not arrived yet. Custom cabinets ordered today still represent a complete financial commitment even if only a deposit has been paid.
Keep a contingency reserve that reflects how much uncertainty exists in the property. A relatively simple renovation in a newer home may need less protection than a gut remodel in a century-old building where walls and floors will be opened extensively. Many homeowners use roughly 10% to 20% as a practical planning range, although the appropriate percentage depends on risk rather than one universal rule. Do not immediately treat unused contingency money as a decoration budget. Hold it until the major demolition, structural, plumbing, electrical, and moisture-related risks have been investigated.
Prioritize spending according to consequences. Roofing leaks, structural concerns, electrical hazards, plumbing failures, moisture problems, and building-envelope defects generally deserve funding before premium appliances or highly decorative finishes. After essential repairs, direct money toward the rooms and improvements that create the greatest daily benefit. Reuse sound materials where possible and keep service locations unchanged when they work well. A homeowner can often reduce spending dramatically by refinishing cabinets instead of replacing them, restoring existing floors, or refreshing a bathroom without moving every fixture. Budget renovation is largely about reducing unnecessary construction rather than simply choosing cheaper products.
Review the budget at regular stages during construction. Compare current committed spending with the original plan and adjust lower-priority items before the project moves into financial trouble. If hidden repairs consume half the contingency, postpone optional upgrades rather than assuming extra money will somehow appear later. Require written pricing for material or scope changes before authorizing them. Good renovation budgeting is an active process rather than a spreadsheet created once before demolition. The homeowners who maintain the greatest control over costs are usually those who continue making trade-offs throughout the project instead of trying to preserve every original idea regardless of new information.
Is a Home Renovation Worth the Cost?
Renovation can be worthwhile even when the project does not recover every dollar at resale. Homeowners also gain value through better functionality, more comfortable rooms, reduced maintenance, improved energy performance, and personal enjoyment. NAR’s 2025 Remodeling Impact Report found that kitchen upgrades, new roofing, and primary-suite additions delivered particularly strong homeowner satisfaction after completion. These benefits can matter greatly when someone plans to remain in the home for many years. A project does not have to behave like a perfect financial investment to be valuable if it substantially improves daily life within a budget the household can comfortably afford.
Resale-focused homeowners should be more selective because expensive projects do not automatically recover more money. NAR’s 2025 analysis found some of its highest estimated cost-recovery rates among relatively modest projects: a new steel front door at 100%, closet renovation at 83%, and fiberglass front door at 80%. By comparison, both complete kitchen renovations and minor kitchen upgrades were estimated at about 60% cost recovery, while bathroom renovations were estimated around 50%. These are national estimates rather than guarantees for an individual property, but they demonstrate why more spending does not always mean better financial return.
Maintenance projects should be evaluated differently from purely decorative upgrades. Replacing a failing roof may not feel optional even if the homeowner cannot recover the full expense through a higher sale price. The project protects the building from further damage and removes a major concern that future buyers would otherwise need to address. Similarly, correcting unsafe wiring or a serious moisture problem preserves the underlying property rather than functioning as a luxury improvement. Some renovation spending maintains value instead of creating new value, and that distinction is important when deciding whether a project is financially sensible.
Avoid overcapitalizing by considering neighborhood values before completing a very expensive renovation. A $150,000 luxury kitchen may be reasonable in one property and extremely difficult to recover in another. Review comparable homes and consider what buyers expect at the property’s likely price level. If you plan to stay for many years, you may still choose premium features for personal enjoyment, but understand that this is partly lifestyle spending rather than guaranteed equity creation. Separating personal value from resale value creates healthier expectations and prevents homeowners from assuming every upgrade will eventually be repaid by a buyer.
The most sensible renovation budget is therefore not necessarily the largest amount you can borrow or spend. It is the amount that solves important problems, improves the home in ways you will use, and remains proportionate to your finances and property. Start with current national benchmarks, replace them with detailed local quotations, keep a contingency reserve, and decide which features matter enough to justify their full installed cost. A renovation becomes much easier to manage when every dollar has a purpose. The goal is not to reach an average number but to build the right scope for your particular house, lifestyle, market, and financial limits.
Frequently Asked Questions About Home Renovation Costs
What is the average cost to renovate a house?
Current 2026 U.S. estimates put the average whole-house renovation at roughly $52,000, although actual projects can range from a few thousand dollars to more than $200,000. The final cost depends heavily on square footage, rooms renovated, location, materials, labor, and structural changes.
How much does it cost to renovate a house per square foot?
A broad U.S. planning range is approximately $15 to $60 per square foot for many renovations. Premium finishes and extensive customization can push costs toward $150 per square foot or more.
How much does a kitchen renovation cost?
Angi’s 2026 data places the average professional kitchen remodel near $26,940, with many projects between approximately $14,589 and $41,548. Complete high-end kitchen renovations can reach $65,000 to $130,000 or more.
How much does a bathroom renovation cost?
Current Angi data places many professional bathroom remodels between roughly $6,648 and $17,646, with an average of about $12,146. Full remodels can reach approximately $25,000 to $80,000, particularly with premium finishes or extensive work.
How much extra should I budget for unexpected renovation costs?
A contingency of roughly 10% to 20% is a common planning approach, with larger reserves useful for older homes or projects involving extensive demolition. Keep the contingency separate from decorative upgrades until major hidden conditions have been uncovered.
